
1. The quality of heat treatment of aluminum extrusion die directly affects the service life of the extrusion die. Quenching is to improve the hardness of the mold, and repeated tempering is to improve the toughness of the mold and stabilize the internal structure. The hardness value of mold heat treatment is specified: large aluminum extrusion die (F>500 hli), hrc45-48; Nruab nrab pwm (F300 ~ 500 hli), HRC47-50; Me Extrusion tuag (F<300mm), HRC48-51; Three points are tested on the same plane of a set of molds, and the hardness value of each point should be qualified within the specified range.
2. Tshwj xeeb mloog yuav tsum tau them rau ob peb lub ntsiab lus nyob rau hauv cov txheej txheem kho cua sov ntawm Extrusion Tuag:
a. Cov cua kub ceev ntawm lub siab-}} patheats, yog li los tiv thaiv lub sijhawm dhau los, yog li tiv thaiv {{} Qhov kev txwv tsis pub dhau thiab suav nrog kev sib txawv;
b. Tom qab quenching, aluminium extusion tuag yuav tsum yog tempered nyob rau lub sij hawm los tiv thaiv cov kab nrib pleb;
c. Thaum lub hardness ntawm extrusion tuag yog pom tias tsis txaus lossis tsis sib xws tom qab kev kho cua sov, thaum lub harding {}}} nrhiav, tsis muaj annealing);
d. Rau cov loj txhuas extrusion pwm lossis ua tiav cov pwm nrog cov txheej txheem hluav taws xob, kom tshem tawm cov kev ntxhov siab hluav taws xob thiab kev ntxhov siab micructubtructure);
e. Qhov ntsuas kub ntawm cov roj quenching ntawm cov pwm yuav tsum yog 100℃kom ntseeg tau tias cov kev ua kom muaj txiaj ntsig.




